SAF Integra-X, User Manual

Page: 66 / 127

INTEGRA-X User Manual WEB GUI
SAF Tehnika JSC 66
Figure 3-64
Phase noise is displayed as rotationally spreading constellation points,
Figure 3-65
:
Figure 3-65
Performance  Over The Air  Rx spectrum
A spectrum curve is a representation of the received signal on the input of the modem. For this
reason, spectrum signal levels will not correspond to the actual radio receiver’s signal level.
The signal appearance will depend on configured channel bandwidth. A measured spectrum
curve can be used to recognize in-band interference or very powerful out-band interference (due
to filters applied).
Figure 3-66 Accessing RX spectrum page
MODIFY button is deactivated in Rx spectrum page.
Only a single user can see Rx Spectrum at a time.
As an example find
Figure 3-67
for 112MHz bandwidth: