6
Installation Instructions
XL-FW10064BM-en-US Rev A · 2011-12-02 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
Figure 5
Figure 6
Figure 4
4. Remove retaining rings from lock pins and discard
(Figure 4)
.
5. Place drill fixture over lock pins
(Figure 5)
with “UP”
mark facing up. Clamp the fixture to the fifth wheel.
%SJMMCPUIIPMFTEFFQXJUIB ESJMMCJU
Remove and discard the fixture. DO NOT reuse the
drill fixture
(Figure 6)
.
NOTE:
Before proceeding, make sure the top plate and
work areas are free of chips and burrs.
7. Install the new retaining rings
(Figure 4)
.
8. Determine whether your top plate has a right-hand, left-hand,
or air release and follow the appropriate instructions. For
left-hand release and air release, see pages 7 and 8. For
right-hand release, see pages 9 and 10.
&-*,*/(1*/
%3*--'*9563&
3&5"*/*/(3*/(4
%3*--)0-&4
Summary of Contents for Holland ELI RK-10855-L
Page 16: ...THIS PAGE INTENTIONALLY BLANK...
