11
XL-DB20012UM-en-US Rev – · 2015-07-29 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Mounting Instructions
Figure 10
Figure 11
11. Torque the castle nut.
a. Rotating Drawbar Mount
Castle Nut Torque:
Torque to a minimum of 100 ft. lbs.
(136 N•m). Increase the torque an
additional amount, if needed, to align
the hole in the shank of the drawbar
with the castle of the castle nut,
(maximum additional rotation to be
1/6 of a full turn)
(Figure 10)
.
b. Fixed Drawbar Mount
Castle Nut Torque:
Torque to a minimum of 550 ft. lbs.
(746 N•m). Increase the torque an
additional amount, if needed, to
align the hole in the shank of the
drawbar with the castle of the castle
nut, (maximum additional rotation
to be 1/6 of a full turn)
(Figure 10)
.
12. Install the cotter pin (XB-121)
(Figure 11)
.
13. When the cotter pin is completely
inserted, spread the ends of the cotter
pin to lock into place.
COTTER PIN HOLE IN SHANK
PROPERLY ALIGNED WITH CASTLE NUT
XB-121