SAF-HOLLAND Holland DB-610-30, Owner'S Manual, Page: 10 / 16

10
XL-DB20012UM-en-US Rev – · 2015-07-29 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Mounting Instructions
Figure 7
Figure 9
Figure 6
Figure 8
MINIMUM OF 24.0" (609.6 mm)
LINEAR INCHES OF .38" (9.65 mm)
WELD REQUIRED TO DEVELOP THE
RATED CAPACITY
XA-1249-49-10
MOUNTED
XA-610-23
XA-610-23
XB-T-318
XB-T-316-A
7. Weld the housing sleeve (XA-610-23)
to the supporting structure using a
minimum of 24.0" (609.6 mm) linear
inches of .38" (3.65 mm) weld to
develop the rated capacity
(Figure 6)
.
8. Install the drawbar (XA-1249-49-10)
into the mounted housing (Figure 7) .
9. Install the washer (XB-T-318)
(Figure 8) .
10. Install the castle nut (XB-T-316-A)
(Figure 9) .