SAF-HOLLAND DB-1400 Owner'S Manual Download Page 11

11

XL-DB20016UM-en-US Rev – · 2015-07-29 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF, 
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Operating Instructions

11.  Maintenance

For proper performance, the following 

maintenance steps should be performed 

every 30,000 miles (48,280 km) or three  

(3) months, whichever comes first.

Failure to inspect and 

maintain the drawbar may 

result in separation of the 

pintle hook and drawbar, 

which, if not avoided,  

could result in death or 

serious injury.

1.  Clean and check for wear, damaged, 

or missing parts, and a secure mount.  

Inspect for worn, damaged or missing 

parts. Replace as required using only 

Genuine SAF-HOLLAND

®

 parts.

2.  Inspect, in particular, the coupling 

contact area of the drawbar.  Inspect  

for any nicks, gouges and deformation, 

which may interfere with or affect the 

safe use of the drawbar. If cracks are 

visible, replace.

3.  Using calipers or the SAF-HOLLAND

® 

drawbar gauges

 

TF-11887, measure 

the cross section of the drawbar eye. 

Replace the complete product when 

wear exceeds 0.125" (3.18 mm) from 

the original surface profile. For original 

profile dimension (Refer to Section 3, 

page 6 Dimensions). 

4.  Inspect the drawbar fasteners. For 

welded connections, inspect welds 

for soundness, refer to Section 2. In 

addition to being a safety hazard, a 

loose drawbar will cause excessive 

"chucking" and rapid wear. Reinstall 

or replace any drawbar which is NOT 

securely mounted.

Summary of Contents for DB-1400













Reviews: