manualshive.com logo in svg

Saey Altum, Installation And Operation Manual, Page: 2 / 21

Share
Download
Saey Altum Installation And Operation Manual Download Page 2

 

2

Contents 

 

 

1.  General warnings and safety instructions……………………………………………..3 

2. Introduction……………………………………………………………………………...3 

3. Fuel……………………………………………………………………………................4 

4. Technical data…………………………………………………………………………...5 

5. Parts…………………………………………………………………………..................6 

6. Technology………………………………………………………………………………8 

7. Options…………………………………………………………………………………...8 

8. Packaging………………………………………………………………………………..9 

9.  Installing the stove……………………………………………………………..............9 

9.1.  The chimney……………………………………………………………………….9 

9.1.1. Chimney tips………………………………………………………………..10 

9.2. Connection from the stove to the chimney……………………………………..12 

9.3. Combustion  air……………………………………………………………………13 

9.3.1.  Combustion air supply……………………………………………………..13 

9.4. Clearances around the stove to be 

respected……………………………………………………………………..……14 

9.5. Fitting the heat shield…………………………………………………………….15 

9.6. Using the fire lighter dish…………………………………………………….….15 

10. Use……………………………………………………………………………………..15 

10.1. First 

use……………………………………………………………………15 

10.2. Use………………………………………………………………….……….16 

11. Operation…..……………………………………………………………………………16 

12. Heating…………………………………………………………………………………17 

12.1. lighting………………………………………………………………….……17 

12.2. 

Heating with firewood……………………………………………………...18 

12.3. Dousing 

the 

fire……..……………………………………………………………………………18 

13. Cleaning  and 

maintenance………………………………………………………………..………….19 

14. Troubleshooting……………………………………………………………….………20 

15. Guarantee……………………………………………………………………………….21 

English 

Summary of Contents for Altum






















Reviews:

No comments