61
The
Intraoral Dental Digital Imaging Sensor
is intended for use in the electromagnetic environment
specified below. Buyer or user should ensure that it is used in such an environment.
The
Intraoral Dental Digital Imaging Sensor
is suitable for use in a professional health care environ-
ment, not including areas where there are sensitive equipment or sources of intense electromagnetic
disturbances, such as the RF shielded room of an imaging system magnetic resonance imaging, in
operating rooms near active AF surgical equipment, electrophysiology laboratories, armored rooms
or areas where short wave therapy equipment is used.
The following tables provide information on compliance of the equipment according to the standard
EN 60601-1-2:2015.
ELECTROMAGNETIC COMPATIBILITY TABLES (EMC)
GUIDANCE AND DECLARATION FOR ELECTROMAGNETIC EMISSIONS
Emission Essays
Conformity
Electromagnetic environments -
guidelines
RF emissions CISPR 11
Group 1
The Intraoral Dental Digital Imaging Sen
-
sor uses RF energy only for its internal
functions. Therefore, your RF emissions
are very low and probably will not cause
any interference in nearby electronic
equipment.
RF emissions CISPR 11
Class B
The Intraoral Dental Digital Imaging Sensor
is suitable for use in all establishments
other than domestic and those directly
connected to the public low-voltage power
supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuation/
Scintillation Emissions
IEC 61000-3-3
Not applicable
