SAESHIN Traus SIP10, Instruction Manual

Page: 10 / 25

1
2
4
5
7
3
6
1. Irrigation Volume Display
: It shows the selected irrigation level. Level 0 is no volume and level 4 is maximum.
2. Program Number Display
: 9 programmable programs set from 1 to 9. And it shows program 1 at every power on.
3. Gear Ratio Display
: It shows the selected gear ratio number.
4. Operation Direction Display
: It shows the selected direction.
5. Speed Display
: It shows the initial setup RPM when it is on standby. The actual value is displayed in real-time during
operation. The number is same as set RPM level when press foot controller to the end.
6. Optic Display (Optic Version)
: The optic function is working when bulb symbol display on the screen.
* Optic function is only operated by Optic angle handpiece and Optic motor.
* When press the speed control pedal on the foot controller after operating the optic function,
LED is turned on.
7. Torque Display
: It shows the initial setup torque value. The actual value is displayed in real-time during operation.
If an actual load is higher than set torque value, the set torque value is on the screen and the motor is
stopped automatically with ‘Torque Limit’ on the screen and beep sound until user releases foot from the
foot controller.
- Impact to device and drop the device may cause breakage of LCD.
LCD WINDOW
16