background image

• 20 •

• 20 •

Green

Green

•  Press and hold the “

” button until 

the (MEMO) icon is displayed. At this 
point, the machine is programming it.

•  The machine begins the brewing 

phase. The “

” icon will be displayed 

to show which button is being pro-
grammed.

•  From now on, press the button with 

the “

” icon each time the desired 

amount of coffee is reached in the 
cup.

At this point, the “

” button is pro-

grammed; each time it is pressed and 
released, the machine will brew the same 
amount of coff ee that has just been pro-
grammed.

Cappuccino Adjustment

The machine allows you to adjust the 
amount of dispensed milk and coff ee, in 
order to obtain a cappuccino according to 
your taste and/or the size of your cups.

Each time the “

” button is pressed 

and released, it is possible to brew a 
programmed cappuccino according to 
several pre-set parameters. The amount 
of milk and coff ee may be reprogrammed 
to your taste.

After fi lling the milk container, place it in 
the machine. Insert the container pin in 
its seat. 
Make sure the container is inserted up to 
its limit.

Place the cup you use every day to enjoy 
your cappuccino.

When the icon on the side appears, re-
lease the “

” button. The machine is 

warming up for the preparation of milk.

In this phase the machine grinds the de-
sired amount of coff ee.

Once the machine is warmed up, the 
brewing of hot milk starts.

The “

” icon will appear on the display.

From now on, press the “

” button 

each time the desired amount of milk is 
reached in the cup.

Once milk has been prepared, the ma-
chine starts brewing the coff ee.

The “

” icon will appear on the display.

From now on, press the “

” button 

each time the desired amount of coff ee is 
reached in the cup.

At this point, the “

” button is pro-

grammed; each time it is pressed and 
released, the machine will brew the same 
amount of cappuccino that has just been 
programmed.

Note: After programming, the 
following page appears. See 

the "Cleaning of the Milk Brewing 
System" section.

Orange

Green

Green

Green

Green

Orange

ADJUSTMENTS

Press and hold the “

” button.

Summary of Contents for SUP 037DRJ





































Reviews: