Saeco SE-50, Instruction Manual, Page: 14 / 20

5. Reset: reset all setting back to factory setting:
Long press “-” or “+” for 3 seconds to reset
1 cup volume: adjust the 1 cup volume (LCD will display the time counting,
but the volume will be determined by flow meter); press and
hold “ ” button for 3 seconds then the machine will start
brewing, when the coffee volume is enough, press again
“ ” button to save
2 cup volume: adjust the 2 cup volume (LCD will display the time counting,
but the volume will be determined by flow meter); press and
hold “ ” button for 3 seconds then the machine will start
brewing, when the coffee volume is enough, press again
“ ” button to save
Cleaning mode
13
Press the “ ” button, select "ST CLEAN" and confirm
via “ ” button. Rotate the steam knob (on the right).
When water starts coming out of the steam wand,
please close via the knob. Rotate the knob again and
stop the steam emission. Remove the water tank, put
500 ml of Saeco Descaler into it and fill with fresh water
up to MAX level. Confirm with “ ” button. Open the
steam knob (on the right) and let the machine release
steam untill the end of the procedure. The machine will
stop autonomously.
1 - Steam circuit descaling process