English
47
9
9.6
Adjusting Brewed Products
9
The machine allows you to adjust the product length
according to your needs and to the type of cup used.
Adjusting the product length can be performed by the
service provider via keypad in visual mode. The
product quantity is adjusted while being brewed. Only
for the "American coffee" and given its particular
dispensing cycle, you can adjust the dose and water
percentage in parametric form.
99
Switch to machine programming mode as described in
section "Access to the Technical Menu".
99
Tech Menu
Settings
Statistics
Exit
999
Select the "SETTINGS" option and press the "OK"
button.
99
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
999
Press the "DOWN" button to select the "BEVERAGE
SETTINGS" option.
99
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
999
Press the "OK" button to enter.
99
BEVERAGE SETTINGS
Espresso
Coffee
HOT WATER
999
Select the beverage that you wish to program and stop
the brewing process when desired, as shown on the
display. Set an espresso coffee as an example.
99
Place a cup under the dispensing spout.
99999
Select "Espresso". Press the "OK" button to enter. The
machine starts brewing coffee. The following screen is
displayed:
99999
The "X" under the cup indicates that you can block the
process (still in grinding phase). If you press the "OK"
button at this time, storage is cancelled. Only when
"V" is displayed under the cup you can save the dose
adjustment.
99999
From now on you have to press the "OK" button when
the desired amount of coffee in the cup has been
reached. This screen is displayed on the control panel.
99999
