English
18
Fig. 15
5.5 Connection to water
mains
Important
The pressure reducer is calibrated during assembly. Should
problems occur with the calibration of the pressure reducer,
the outlet pressure value must absolutely be reset to 0.8 – 1
bar max. Different or approximate calibration may cause
product quality and quantity variations when brewed.
Important
It is recommended to use a descaling device for the water
network supplying the vending machine, especially for water
with a high calcium and magnesium content (hard water).
Connect the vending machine to a drinking water supply
pipe with a pressure ranging between 1.5 and 8 bars (see
data plate).
Important
Before connecting the appliance to water network, please
read and follow the applicable regulations in force in your
country.
Remove the cap from the coupling placed on the vending
machine back panel (Fig. 15). Connect the water supply
pipe to the 3/4” Gas coupling of the vending machine
(Fig. 15).
5.6 Connection to the
electric network
Warning
The Maintenance Technician, who is responsible for the
installation of the vending machine, must ensure that:
- the electric system complies with current safety
regulations;
- the supply voltage corresponds to that indicated on the
data plate.
If in doubt, do not proceed with the installation and ask
qualified and authorized personnel to check the system
accurately.
The vending machine is equipped with a power cord which
must be plugged into the appropriate socket on the vending
machine back panel (Fig. 16).
Important
After the chosen payment system has been installed,
the corresponding parameters can be set through the
programming menu (see 8.2).
Warning
The Manufacturer declines any liability for any damage to the
vending machine, to property and/or injury to persons, caused
by the installation of the payment system. The responsibility
falls to the person who carried out the installation.
For more information visit www.Gumball.com | 800-260-0010 | +1-214-550-5079
