English
13
Fig. 6
2.4. Technical specifications
Data plate
showing minimum
and maximum
water supply
pressure
Container capacity
Coffee beans:
1,00 kg
Chocolate:
1,75 kg
Milk:
0,65 kg
Lemon tea:
1,50 kg
Ginseng:
double: 1,85 kg, standard: 1,15 kg
Ground coffee:
0,62 kg
Freeze-dried coffee:
standard: 0,41 kg,
small: 0,23 kg
Barley:
standard: 0,36 kg,
small: 0,20 kg
Height:
594 mm standard
714 mm with extension
Width: 394
mm
Depth: 430
mm
Weight:
31 kg Espresso
35 kg Instant with extension
31 kg T.T.T.
38 kg Cappuccino with extension
Power consumption:
see data plate
Supply voltage:
see data plate
Electric voltage frequency:
see data plate
Power cord length:
1,600 mm
Water mains connection:
3/4” Gas type
Water mains pressure:
see figure 6
3 SAFETY
3.1 Introduction
In compliance with the Low Tension Directive 2006/95/
EC (which replaces the directive 73/23/EEC and following
amendments) and CE Marking Directive 93/68/EEC,
SAECO VENDING
has drawn up a technical file of the
PHEDRA
vending machine held at its plants. The following
regulations were taken into account during the design
phase:
- EN 55014
- EN 6100-3-2
- EN 61000-3-3
- EN 61000-4-2
- EN 61000-4-3
- EN 61000-4-4
- EN 61000-4-5
- EN 61000-4-11
- EN 60335-2-75
- EN 60335-1
3.2 General safety regulations
It is forbidden to:
- tamper with or disable the safety systems installed on the
vending machine;
- carry out maintenance on the vending machine without
unplugging it first;
- install the vending machine outdoors. It should be placed in
dry areas where the temperature never falls below 1°C;
- use the vending machine for purposes other than those
indicated in the sale contract and in this publication;
- connect the appliance to the mains using multi-sockets or
adapters;
- use water jets to clean the vending machine (Fig. 6).
It is compulsory to:
- check the electrical power line for conformity;
- use original spare parts;
- read the instructions contained in this publication and in
the enclosed documents carefully;
- use personal protection devices during installation, testing
and maintenance operations.
Fig. 7
Fig. 5
594
430
394
714
Standard version
Extension version
For more information visit www.Gumball.com | 800-260-0010 | +1-214-550-5079
