19
ENGLISH
19
3
Set the “” water fi lter according to the measurements per-
formed (see previous chapter) and indicated on the base of the fi lter:
A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip
4
Put the “” water fi lter into the empty water tank. Press it
down until it cannot move any further.
5
Fill the water tank with fresh water and reinsert it into the machine.
6
Dispense all the water of the tank by using the hot water function (see
“Hot Water Dispensing” chapter).
7
Fill the water tank again.
8
Press the “
” button and scroll the pages by pressing the “
” button
until the following display is shown.
Y
ello
w
9
Press the “
” button to select “ON” and press the “
” button to con-
fi rm.
Y
ello
w
Gr
een
10
To exit, press the “
” button. The machine shows this display and is
ready to brew.
In this way the machine has been programmed to inform the user of
the need to replace the “” water fi lter.
