Saeco Minuto HD8763/31 Page 74 Operating Instructions Manual Download

Page: 74 / 84

ENGLISH

Warning Signals (Yellow Colour)

The machine is warming up.

The machine is performing the rinse cycle. Wait until the machine has com-
pleted the cycle.

The machine needs the "" water fi lter to be replaced.

The brew group is being reset due to machine reset.

Fill the coff ee bean hopper with coff ee beans and restart the cycle.

The machine is priming the circuit.

You need to descale the machine. Press the “

” button to start the descaling

process. Follow the steps described in the “Descaling” chapter of this manual.
If you want to descale the machine later, press the “

” button to continue

using the machine.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.

Ready Signals (Green Colour)

Insert the water dispensing spout and press the “

” button to start

dispensing.
Press “

” to exit.

The machine is warming up to dispense beverages.

Summary of Contents for Minuto HD8763/31





















































































Search results

Summary of Contents for Minuto HD8763/31

Reviews:

Related manuals for Minuto HD8763/31

Brands by name

Popular brands

Saeco Minuto HD8763/31, Operating Instructions Manual

Search results

Summary of Contents for Minuto HD8763/31

Reviews:

Related manuals for Minuto HD8763/31

Brands by name

Popular brands