73
ENGLISH
73
Note:
These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until
the machine performs a self-adjusting operation as described in chapter
“Saeco Adapting System”.
Machine actions
Causes
Solutions
There is a lot of ground cof-
fee under the brew group.
Coff ee is not suitable for auto-
matic machines.
It may be necessary to change the
type of coff ee or the coff ee grinder
settings.
The machine grinds the
coff ee beans but no coff ee
comes out.
(See note)
There is no water.
Fill the water tank and prime the
circuit (chapter "Using the Machine
for the First Time").
The brew group is dirty.
Clean the brew group (“Weekly
cleaning of the brew group”
chapter).
This might occur when the ma-
chine is automatically adjusting
the dose.
Brew a few cups of coff ee as de-
scribed in chapter "Saeco Adapting
System".
The dispensing spout is dirty.
Clean the dispensing spout.
Coff ee is too weak.
(See note)
This might occur when the ma-
chine is automatically adjusting
the dose.
Brew a few cups of coff ee as de-
scribed in chapter "Saeco Adapting
System".
The coff ee is too coarse.
Change coff ee blend or adjust the
grind as explained in chapter “Ad-
justing the ceramic coff ee grinder”.
Coff ee is brewed slowly.
(See note)
The coff ee grind is too fi ne.
Change coff ee blend or adjust the
grind as explained in chapter “Ad-
justing the ceramic coff ee grinder”.
Circuits are clogged.
Perform a descaling cycle.
The brew group is dirty.
Clean the brew group (“Weekly
cleaning of the brew group”
chapter).
Coff ee leaks out of the
dispensing spout.
The dispensing spout is clogged.
Clean the dispensing spout and its
holes.
