Saeco Group 200 Operation And Maintenance Manual Download Page 49

Page: 49 / 68

English

Important

Carefully blot the upper and lower filter and blow

with compressed air.

During cleaning and maintenance operations do

not stress the following electrical parts: keyboard

card, cpu card, dosing coil, sugar coil.

9.1.3 Product loading

Load products and/or consumable stores when

necessary.

For these operations refer to the first-installation

procedure, described in section 6.8.

9.2

Maintenance

Empty the liquid waste trays, rinse and/or

replace them.

Empty the dump box.

Remove all containers and wipe with a damp

cloth all container supporting areas, the bottom

and outside of the machine and above all the

brewing area.

Disinfect all parts in contact with foodstuffs.

Remove and rinse the COFFEE GROUP,

lubricate all moving parts with silicon grease for

food use.

Remove and rinse all the visible parts of the

brewing area.

Replace gaskets and filters.

EVERY

DAY

EVERY

MONTH

EVERY

SIX

MONTHS

EVERY

10,000

STROKES

EVERY

WEEK

Espresso Italia PTY LTD

www.espressoitalia.com.au

Freecall 1300 660 976

Summary of Contents for Group 200





































































Search results

Summary of Contents for Group 200

Reviews:

Related manuals for Group 200

Brands by name

Popular brands

Saeco Group 200, Operation And Maintenance Manual

Search results

Summary of Contents for Group 200

Reviews:

Related manuals for Group 200

Brands by name

Popular brands