manualshive.com logo in svg

Saeco GranBaristo Avanti, Service Manual, Page: 51 / 66

Share
Download
Saeco GranBaristo Avanti Service Manual Download Page 51

GRAN BARISTO                                                                                         07 DISASSEMBLY

Page       / 09

Remove the water tank, 

coffee  container and cover, 

drip tray, dreg drawer, 

brewing unit, hot water 

dispenser, Milk carafe.

Remove the cover.

Remove the cover.

Lateral panels

Top cover

Unscrew the 

screws shown. 

Unscrew the screws shown. 

Unscrew the screw shown. 

Unscrew the 

screw shown. 

Remove the left, right 

and posterior  panels

 7.1. 

Outer 

Shell 

01

CAUTION: Every time that it’s necessary to access 

inside the machine, after removing of the two lat-

eral panel, the capacitive keyboard must be 

fi

 xed 

on the appliance side with paper adhesive tape, as 

shown in the image.

This action serves to 

avoid damaging the 

electrical connections.

Take care to not cover keyboard buttons with the tape.

WRONG

RIGHT

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for GranBaristo Avanti



































































Reviews:

No comments