4
Pour the whole bottle of Philips descaler into the water tank and then fill it
4
with water up to the CALC CLEAN level. Then place it back into the machine.
5
Place a large container (1.5 l) under the coffee dispensing spout.
5
6
Make sure that the HygieSteam container is correctly assembled and attached
6
to the machine. Place the milk tube in the milk tube holder.
7
Follow the instructions on the screen to start the descaling procedure. The
7
descaling procedure lasts approx. 30 minutes and consists of a descaling cycle
and a rinsing cycle.
8
Once the descaling cycle is finished, you need to rinse the water tank and
8
water circuit. Follow the instructions on the screen.
9
Place a new AquaClean filter in the water tank and activate it (see
9
the AquaClean water filter (5 min.)
).
Tip: Using the AquaClean filter reduces the need for descaling!
What to do if the descaling procedure is interrupted
You can exit the descaling procedure by pressing the on/off button on the
control panel. If the descaling procedure is interrupted before it is completely
finished, do the following:
1
Empty and rinse the water tank thoroughly.
1
2
Fill the water tank with fresh water up to the CALC CLEAN level indication
2
and switch the machine back on. The machine will heat up and perform an
automatic rinsing cycle.
3
Before brewing any drinks, perform a manual rinsing cycle. To perform a
3
manual rinsing cycle, first dispense half a water tank of hot water and then
brew 2 cups of pre-ground coffee without adding ground coffee.
24
