32
English
7- FUNCTION / USE AND
PROGRAMMING
INTRODUCTION
The programming software permits the checking of the
following operations:
- handling of 1 - 2 coffee units
- control of four different coffee doses for each unit
- simultaneous function of both coffee and tea units
- volumetric check on coffee measures
- simulated measure programming
- filling level check and control
- system supervision through alarms
- continuos, delivery time-out and further functions
- serial connection with accounting devices
6.5 Replacement of the thermostat to
reduce the coffee dispensing group
temperature.
Remove cup heating bowl (1). Disconnect group thermostat
(2) (Code WGADM1561 – T 103°C) and replace it with
the lower temperature thermostat (Code WGADM2067
- T 93°C), included in the machine equipment.
T1 – single espresso coffee
T2 – double espresso coffee
T3 – single long coffee
T4 – double long coffee
T5 – Programming/continuos
Keyboard symbols:
fig. 10
fig. 9
6.6 Spouts included in the
supply.
No. 4 spouts are supplied with the machi-
ne to dispense one or two coffees.
The figure (beside) shows the different
distances from the cup-holding tray (H),
depending on the different types of spouts
fitted on the filter holder.
Summary of Contents for AROMA COMPACT SE
Page 24: ...Cod WGA8011011000 Rev 05...
