manualshive.com logo in svg

Saebo SaeboStim Pro, Instruction Manual, Page: 4 / 52

Share
Download
Saebo SaeboStim Pro Instruction Manual Download Page 4

Sae

bo

Stim Pro

Index

Introduction  .................................................................................................... 1

List of Symbols  ............................................................................................ 3, 4 

Contraindications  ....................................................................................... 4 -  6

Warnings  ..................................................................................................... 6, 7

Adverse Reactions  ........................................................................................... 7

EMC, Caution  .................................................................................................. 8

Guidance and Manufacture's Declaration .................................................... 9 -  17

Intended Use  ................................................................................................ 19

Description of Device and Controls  .......................................................... 20, 21

Display Screen Symbols and Description ................................................... 22, 23

Getting Started .............................................................................................. 24

Installing Batteries  ........................................................................................ 25

Clean Skin  ..................................................................................................... 26

Plug in Electrode Wires  ............................................................................. 26, 27

Powering the 

Saebo

Stim Pro  ........................................................................ 28

Select and Start a Program  ...................................................................... 29 -  35

Sensory Electrical Stimulation (SES) Program  ............................................ 36, 37

Usage of Electrical Pads  ................................................................................ 38

Care and Maintenance .............................................................................. 39, 40

Program Information  ............................................................................... 42 -  46

Troubleshooting  ........................................................................................... 47

Technical Support, Warranty  ......................................................................... 48

Index

Summary of Contents for SaeboStim Pro





















































Reviews:

No comments