background image

90 DAY LIMITED WARRANTY TERMS AND CONDITIONS 

(7-Year Optional Extended Service Contract) 

SAE Limited Warranty 

Terms and Conditions

 

All SAE products are warranted against defects in materials and workmanship for 90 days from the date of purchase by 

the original owner. The date of purchase shall be established by the original owner presenting to the SAE Customer Ser-

vice Facility the original owner’s purchase receipt or sales slip showing from whom the product was purchased, the date 

of purchase and the purchase price of the unit. 

In the event that proof of purchase cannot be established as stated in the preceding sentence, the warranty period shall 

commence on the date of manufacture, provided the serial number on the unit has not been altered in any manner. 

During the warranty period, SAE will repair, or at its option, replace at no charge, components that prove to be defective 

provided the product is returned in accordance with the shipping instructions that are contained in the unit. The unit is to 

be sent PREPAID in the original carton and packing along with a detailed description of the problem to SAE in the event 

it needs factory servicing. SAE will return it prepaid to you upon completion of the service. 

 

Optional Extended Warranty Program

 

The standard 90-Day Limited Warranty will be extended to a 7-Year Limited Warranty (on all Power Amplifiers) if the fol-

lowing conditions are met: 

The SAE product is purchased from an authorized SAE reseller. The customer completes the registration card. The cus-

tomer returns the completed registration card AND copy of original bill of sale to SAE within 14 days of purchase. 

This extended warranty is transferable to subsequent purchasers as long as all Optional Extended Warranty conditions 

are met. 

 

Transferability

 

The above warranties are transferable to subsequent owners as long as all the conditions are met under the Optional 

Extended Warranty Program. The warranty is not transferable if the unit(s) was originally purchased from an unauthor-

ized seller. 

The above warranties do not apply if the product has been damaged by accident or misuse or as a result of modification 

by other than the SAE factory service facility. 

SAE shall not be held liable for incidental or consequential damages of any kind arising from the sale or use of its prod-

ucts. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation 

or exclusion may not apply to you. 

THERE ARE NO WARRANTIES GIVEN BY SAE THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HERE-

OF. ALL IMPLIED WARRANTIES OF FITNESS FOR PURPOSE SOLD, MERCHANTABILITY, DESCRIPTION, QUALI-

TY PRODUCTIVENESS OR ANY OTHER MATTERS ARE LIMITED TO THE TERM OF THE EXPRESS WARRANTIES 

HEREIN STATED. 

Some states do not allow limitations on how long an implied warranty may last, so the above limitation may not apply to 

you. 

Obligation to Make Changes

 

Products are sold on the basis of specifications applicable at the time of sale. SAE shall have no obligation to modify or 

to update products once sold. This warranty gives you specific rights and you may also have other rights that vary from 

state to state. This warranty is applicable only in the United States. 

 

Warranty Outside the United States

 

SAE has formal distribution agreements in many countries. The SAE importer in those countries has assumed the re-

sponsibility for servicing SAE products. Please contact the dealer or distributor in the country where you purchased your 

product for service issues. 

Summary of Contents for 8300













Reviews: