1
IMPORTANT NOTICE
I. It is imperative that the SAE 2HP-D be connected to a ground via its three wire AC power cord. It is important that the
AC power outlet, which the amplifier is plugged into, is actually grounded. Failure to do so will severely compromise the
performance, reliability and safety of use of the SAE 2HP-D.
II. Ventilation is an important issue when placing the SAE 2HP-D in a system. If the amplifier is intended for passive (convection)
cooling, please make certain that it is placed in a well-ventilated area or rack unit. If the amplifier will operated with fan
cooling, please allow space at the rear for heat to be discharged and cool air must be allowed to enter the amplifier.
III. Please take note that powerline conditioners are not generally recommended for use with the SAE 2HP-D. If it is your
intention is to plug the 2HP-D into a line conditioner, check with your dealer to make certain that the particular conditioner
that is intended for use DOES NOT DEFEAT THE AC GROUND on its AC outlets and that it is capable of 20A operation.
Otherwise, the amplifier’s power output may be compromised.
IV. DO NOT remove any cover panels from the amplifier as there are no user serviceable components inside. Refer servicing
and updating to qualified service personnel only.
