DESCRIPTION:
FXR Division Pro Series Seat
PART NUMBER:
FD88209
FITMENT:
H-D® FXR models 1988-2000
Qty Item
Qty
Item
1
FXR Division Seat
1
Backrest assembly
1
Backrest retention bracket
1
Front mounting bracket
4
Bolts, 5/16" x 18
4
Washers, 5/16
1 Instructions
Please read these instructions completely before starting installation. All “NOTE”
“CAUTION” and “WARNING” notations are serious safety issues and should be read
carefully. Possible injury to riders or damage to the motorcycle and/or accessory
may result if improperly installed.
These instructions contain important information for future reference and should be given to the customer.
Because of the variety of motorcycle configurations, other accessories, and the features and intended use of this Saddlemen seat, there
may be different mounting options. You are responsible for the proper installation of this seat on your motorcycle. Your attention to these
installation instructions, any additional specific instructions and recommendations will permit the safe and proper use of this seat. You must
mount this seat properly and securely before riding your motorcycle. If you lack the ability to safely and properly install this seat, seek out a
qualified motorcycle technician for assistance. During installation, you may need to support the motorcycle with a suitable stand or lift so it
will not tip over and injure you, or damage the vehicle. Using or mounting this seat improperly could result in a loss of control of the motor-
cycle which could result in damage to your motorcycle or other personal property, the property of third parties, and/or personal injury to
yourself or others, up to and including death.
PASSENGER GRAB STRAP: This accessory seat is provided without a passenger grab strap. Carrying a passenger without a
grab strap in place on your motorcycle may be hazardous for the passenger. Grab straps, rear mounted foot pegs, sissy bars,
passenger backrests and trunks aid in making a passenger more secure on the vehicle. Laws in some jurisdictions require
grab straps or other security devices when a passenger is transported. Do not transport a passenger if they are not secure.
Do not disable grab straps or other safety features provided on your motorcycle and obey all traffic laws while riding.
Saddlemen offers a complimentary grab strap for this seat, part no. 15327. Call (310) 638-1222 for more information.
Always ride responsibly and take precautions to be sure your passenger is secure and comfortable at all times.
XXXX
California Proposition 65 Warning
WARNING: This product contains chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information: www.P65/Warnings.ca.gov
BE SURE TO THOROUGHLY READ AND CLOSELY FOLLOW THE MOUNTING INSTRUCTIONS THAT ARE INCLUDED WITH THIS SEAT.
• The seat must be installed and securely fastened onto the chassis of the motorcycle. Refer to your motorcycle’s Owner’s Manual and/or Service Manual for guidance.
• If you do not understand these instructions DO NOT mount the seat, and remove any related components you may have already installed on your motorcycle.
• Thoroughly inspect your motorcycle’s seat before every ride. Do not use this seat if its mounting system has been modified, has deteriorated, loosened or is beginning to fail.
• Continually check the security of your seat and other accessories at each stop as you ride. Items attached to your motorcycle can loosen during operation, so be sure to
check them frequently.
IS-11-400446 Rev 0 (10-2022)
