Sacred Sun 10 OPzV 1000 Technical Manual Download Page 4

Product Introduction

 

 

 

 

 
 

Chapter  One Product Introduction

 

 

 

Product Characteristics 

02

 

 

 

Floating design life

 

Floating design life is 18 years for 2V  tubular gel batteries.

 

and 15 years for 12V battery ( 25

)

 

Plate

 

Tubular type for positive plate, active substance break off is avoided. Framework is die casted 
with multielement alloy, it’s crystal grain is micro and compact, corrosive proof performance is 
enhanced and in long service life.

 

Pasted type for negative plate, grid in radial structure, utilization ratio of active substance and 
large current discharge capacity are improved, and in good charge acceptance.

 

Gel electrolyte

 

Main material is made of gas phase SiO2 imported from Germany, in initial stage, the electrolyte 
is in watery collosol state, fully filled in all the plate space,equalized reaction is achieved for 
all plates. Sufficient electrolyte design could insure battery could not be dry up in condition 
of high temperature and over charged, thermal capacity is large, heat dissipation is good, 
thermorunaway will not be happen. In finished battery, electrolyte is in gel state, no flow, so there 
is not acid leakage and delamination. Electrolyte is in low density, normally 1.24~1.26g/ml, it is 
less corrosion to plate.

 

Special separator

 

Particular micropore PVC-SiO2 separator imported from European AMER-SIL is adopted, 
porosity is large and electrical resistance is low. Electrolyte storage space is large, pro- 
heterozygosity is good with electrolyte. Battery has long cycle life.

 

Long service life

 

Good corrosion proof Pb-Ca-Sn multielements alloy and gas recombination technoloy are 
adopted for positive and negative plate.

 

Optimize active substance formula, battery capacity is higher about 5-15% than DIN40742:1999 
standard.

 

Low electrolyte density, reduce the corrosion to grid.

 

High temperature and humidity solidifying technology is, 4BS lead paste formula.

 

Particular and high efficiency formation technology insure the plate quality.

 

Deep discharge performance

 

With excellent deep discharge proof performance, the battery can be connected in load after

 

Summary of Contents for 10 OPzV 1000



















Reviews: