background image

AUSTRALIAN STANDARDS COMPLIANCE 

WARNING: TO PREVENT FALLS THE MATTRESS BASE OF THIS COT SHOULD BE 

ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP 

RECOMMENDED MATTRESS SIZE: 

700

 MM 

WIDE

 X 

1320

 MM 

LONG

 X NO 

MORE THAN 1

1

0 MM THICK 

RECOMMENDED MATTRESS SIZE. This cot has been manufactured for use with a mattress 

which measures 700mm wide by 1320mm long by 110mm in thickness. The width and 

length are specified because it is important that the gaps between the mattress and the 

sides and ends of the cot does not exceed 40mm when the mattress is pushed to one side 

or end, and 20mm when the mattress is centered to the cot. The thickness of the mattress 

has been specified to ensure that the depth of the cot is greater than 500mm with the 

mattress base in the lower position to minimize the risk of a child climbing or falling out of 

the cot.

Failure to follow these warnings and the assembly instructions could result in serious injury 

or death.

Before each usage or assembly, inspect cot for damaged hardware,

Loose joints, missing parts or sharp edges. Do not use cot if any parts are missing or 

broken. Contact Sacred Bundle Pty Ltd for replacement parts and instructional literature if 

needed. Do not substitute parts.

When child is able to climb out or reach the height of 90 cm, the cot shall no longer be 

used.

Do not place cot near power points and heaters. 

Do not place cot near windows where cords from blinds or drapes may strangle the child.

Keep medication, strings, elastic bands, small toys or small items such as coins out of reach 

from any position in the cot.

If refinishing, use a non-toxic finish specified for children’s products.

Do not use a water mattress with this cot

Upon completion of assembly, be sure all screws and bolts have been tightened securely.

A periodic check should be made of all screws and bolts and tightened if necessary.

Never use plastic shopping bags or other plastic film as mattress covers or pillow case as 

they can cause suffocation.

Do not drag cot.

After cot has been completely assembled, store instruction sheet in a safe place for future 

reference.

Under no circumstances should the warning labels be removed from mattress support and 

removable base!

WARNING: TO PREVENT FALLS, THE MAXIMUM 

MATTRESS THICKNESS SHOULD NOT EXCEED 1

1

0 MM. 

Summary of Contents for Myla









Reviews: