background image

8

CHANGING THE FRONT

Change up the look of your speaker with the changeable front – do you 

want it classic chic, matching the color of your sofa or should it pop with an 

eye-catching color? It’s up to you! 

1. 

Remove the front by lifting the right side of the front (you will find a 

small space between the frame and the front). You will be able to loosen 

the front all the way around the edges and finally remove it completely. 

Please note: The front is attached thoroughly to ensure sublime sound 

quality 

2. 

Attach the new front by placing the “sticks” into the matching holes. 

Press the front onto the speaker all the way around the edges - and 

your new look it ready

CLEANING THE PRODUCT 

1. 

Please turn off the speaker before cleaning it.

 

2. 

Do not use volatile solvents (such as ethanol, rosin, toluene solvent) to 

clean the speaker. This type of chemicals may damage the product. 

3. 

Please use a damp cotton- or microfiber cleaning cloth.

 

4. 

While cleaning the speaker, please be aware to avoid getting water into 

the charging input and the speaker parts behind the changeable front. 

Water and fluids may cause malfunction to the speaker. 

Summary of Contents for WOOFit Go XQ













Reviews: