MTA36 User Manual
-17-
6. CONFIGURATION
Once the device is installed, the application is downloaded and the communication is
made, the device has to be configured according to its installation:
1º Connect to the device.
To communicate with the instrument through the ModBus protocol it is necessary that
the instrument has an identity (by default all the instruments have the identity 1)
When connected to the RS485 model, it can be connected via a COM port or via
TCP/IP. In this case you must enter the IP address and port.
Once connected, just press the close button and enter the configuration menu
2º Basic Configuration.
In the configuration menu we enter the basic configuration menu and introduce the
network parameters. Here we can change the identity of the equipment (max 247)*,
the freezing data refresh time and the voltage and current input value.
