- 5 -
Vario Pedestal 2-75
Manual
Quickfix
connection valve
Arrow mark
Clampscrew of
Quickfix
Signal pin
Fig. 4
The column should be filled with air. This is done with the
enclosed pump or a compressor (max. 12 bar/ 174 psi) in
depressed column position). A safety valve is installed in the
system to prevent overpressurizing the column.
In general the column is filled with a minimum pressure of
2 bar (29 psi) in order to secure a permanent tension on
the installed cables. This equals a necessary payload of
10 kg/22 lbs.
Connect pump/compressor; the connecting valve is loca-
ted at the side of the Quickfix.
In order to compensate for any change in temperature
during a broadcast, three trim weights should be placed
on the column.
The column may now be pressurized with air until it moves
up by itself.
Disconnect the hose from the column and press the center
pin of the valve to perform a fine adjustment for a precise
weight compensation.
