Page # 17
PTO CONTROL CONSOLE AND DISPLAY
The PTO on/off switch
turns the PTO on and off which in turn drives the augers and reel. The speed of the
augers and reel are directly controlled by engine RPM.
The auxiliary shift switch
is used to change the gear range of the auxiliary transmission of the truck chassis
(If so equipped). To avoid loss of drive the shift switch should only be used when the vehicle is at a stand still.
with the transmission in the NEUTRAL position.
DO NOT ATTEMPT TO CHANGE THE AUXILIARY TRANSMISSION WHILE IN MOTION!
The reversible radiator fan override switch
can be used at any time. The radiator fan is set to reverse itself
at a predetermined time interval to help eleviate excess dust and debris buildup on the radiator. This button
allows the operator to reverse the airfl ow on the radiator and should be used if there is a noticeable increase
of dust or debris on the radiator or if there is a spike in the engine water temperature.
The bunk light switch
is an on-off switch that controls the fl ip chute and rear bumper lights.
The hour meter
registers how many hours the PTO is engaged.
Auxilliary
Trnasmission
Switch
Reversible
Fan
Switch
Bunk
Light
Switch
Mixer
Hour
Meter
Door
Control
Joystick
PTO
On/Off
Switch
