SAC Turbo-Max 6100 Series Operator And Parts Manual Download Page 54

Page: 54 / 82

Page # 54

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

APPENDIX

OIL SPECIFICATIONS FOR DROP GEARBOX

OIL CHANGE:

After initial 100 hours, then every 1000 hours or annually thereafter. These

intervals may be modified depending on the actual operating conditions. If used on seasonal

equipment, it is recommended that the oil be changed at the end of each season to remove

moisture and corrosive contaminants.

OIL FILL LEVEL:

Unit should be filled with approximately 1.5 pints of gearlube so that the oil

is to the top of the filler neck or to the middle of the sight guage. (if so equipped)

OIL TYPE:

EP 80 to 90 WT gear lube, Viscosity Index of 93 and a viscosity of 780 @ 100 degrees

F SUS and 76.7 @ 210 degrees F SUS is recommended.

GEARBOX TEMPERATURE:

DO NOT EXCEED 200 DEGREES F.

OIL SPECIFICATIONS FOR HYDRAULIC SYSTEM

OIL CHANGE:

Normal change intervals of 1000 hours or annually should be followed. If used

on seasonal equipment, it is recommended that the oil be changed at the end of each season

to remove moisture and corrosive contaminants.

OIL FILL LEVEL:

Oil in the hydraulic tank should be maintained at a level that is 2” below the

filler cap or visible in the sight gage, if so equipped.

OIL TYPE:

Hydraulic Oil Viscosity Index of 140, with a viscosity of 281 @ 100 degrees F SUS

and 56.5 @ 210 degrees F SUS is recommended.

OIL TEMPERATURE:

DO NOT EXCEED 200 DEGREES F.

OIL SPECIFICATIONS FOR ELECTRIC HYDRAULIC UNIT

OIL CHANGE:

Normal change intervals of 1000 hours or annually should be followed. Oil

should be changed with the hydraulic cylinders retracted.

OIL FILL LEVEL:

With the hydraulic cylinders retracted, fill the reservior to 1-1/2” below the

filler cap. (approximately 2 gallons)

OIL TYPE:

Dextron III Automatic Transmission Fluid

OIL TERMPERATURE:

DO NOT EXCEED 200 DEGREES F.

Summary of Contents for Turbo-Max 6100 Series



















































































Search results

Summary of Contents for Turbo-Max 6100 Series

Reviews:

Related manuals for Turbo-Max 6100 Series

Brands by name

Popular brands

SAC Turbo-Max 6100 Series, Operator And Parts Manual

Search results

Summary of Contents for Turbo-Max 6100 Series

Reviews:

Related manuals for Turbo-Max 6100 Series

Brands by name

Popular brands