SOUTHERN AVIONICS COMPANY
SE Series Installation and Setup
6-7
System Site Configuration
When the transmitter setup is done completely, click the
Back
button to close the
Transmitter
Setup
window and return to the
Main
window.
6.4.3 Call Sign Setup
LCD DISPLAY
Press the
CALL SIGN
key to open the
CALL SIGN ENTRY
menu, as shown below.
Repeat pressing the
CALL SIGN
key to clear the entry in the field box.
When the
ENTER
key is pressed, The SE system will change to 0 Watts RF power level
immediately.
WEB WATCH
In the
Transmitter 1 : Setup
window shown in Figure 6-2. Set the Call Sign as desired, then
click the
Set
button to send the value to the
Transmitter Control
board.
When the transmitter setup is done completely, click the
Back
button to close the
Transmitter
Setup
window and return to the
Main
window.
6.4.4 Transmitter Mode Setup
There are three options IDENT, CARR, and CONT.
LCD DISPLAY
Press the
MODE
key to toggle the CARR, IDENT, CONT.
Example: change from IDENT to CARR by pressing the
MODE
key on the LCD screen, shown
as below:
CALL SIGN ENTRY
Maximum 8 Characters
Entry Call Sign: SAC