SOUTHERN AVIONICS COMPANY
SE Series Installation and Setup
6-4
System Site Configuration
6.4.1 RF Frequency Setup
LCD DISPLAY
Press the
FREQ
key to open the
RF FREQUENCY ENTRY
menu, as shown below.
Repeat pressing the
FREQ
key to clear then enter the desired frequency in the field.
When the
ENTER
key is pressed, the RF power level will be set to 0 Watts immediately to protect
the transmitter.
Press
SPCL FCTN
then
1
to store any changes.
WEB WATCH
In the SE SERIES TRANSMITTER Web Watch window, click on
Setup
in the right column box
on the
Main
window to open the
Transmitter 1/2 : Setup
window shown in Figure 6-2.
Figure 6-2. Web GUI Transmitter Setup Window
RF FREQUENCY ENTRY
FREQ should be between 190K and 1800K Hz
Enter RF Frequency: [ 320000] Hz
