Page # 22
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.
877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
BEFORE attempting operation.
•
Should a hydraulic hose and/or adapter require service, contact your local SAC Dealer or Distributor. Always give your Deal-
er the Model Number and Serial Number of your Turbo-Max Mixer. With this information your Dealer will be able to provide
specifications on the construction of the hydraulic circuit. Your Dealer will also be able to provide instructions on how to
replace these components and inform you of any safety precautions you may need to know about.
Reservoir Breather/Filler Cap
The hydraulic oil reservoir is equipped with a breather/filter cap assembly located at the fill location of the reservoir. This
breather cap allows the hydraulic system to vent internal system pressure to the atmosphere. In order to function properly
the breather cap must be kept clean and free of contaminants. Always remove any debris or foriegn material buildup away
from the breather cap.
Remove and clean the breather cap every 200 hours of operation, or twice annually, or when-
ever servicing the hydraulic oil reservoir.
To maintain the breather cap, follow this proceedure.
1.
Visually check the breather cap every day.
Remove any material that falls on top of the breater and surround
ing areas. Keep clean and allow for free flow of air for venting the internal system pressure to the atmosphere.
Important:
Hydraulic oil is added to the hydraulic system through the breather hole. Always clean around the
breather prior to removing it and adding oil.
2.
Cleaning the Breather Cap.
a. Clean the top of the hydraulic reservoir.
b. Remove the breather cap.
c. Remove any buildup in the breather passages. If the breather is clogged or damaged in any way,
replace it with a new unit.
d. Reassemble the breather cap onto the hydraulic tank.
Important:
When spraying water to clean the mixer, protect the breather and resrevoir to avoid contamination.
HYDRAULIC FILTRATION
Breather Cap replacement part# HYD57XL103103HN