EC-SSD2
OFFLINE CLONING PROCEDURE
1. Once more, confirm the USB cable is NOT connected to the
USB enclosure.
2. Your source disk will be in SLOT A, and your target disk will be
in SLOT B.
3. After installing both disks, connect your AC adaptor to the wall
outlet and to the enclosure.
4. Turn on the enclosure with the power button located on the
back.
5. Push and hold down the OFFLINE CLONING button on top of
the unit for 3 seconds. The cloning process will begin as soon
the progress LEDs start to flash. Let go of the button and let the
enclosure work.
6. Once the LEDs stop flashing and all four of them remain solid
at 100%, the cloning process is finished. Beware, this process
may take a long time, even with extremely fast NVMe disks. It
will mainly depend on the size of the disks, and more specifically
on the amount and size of small files.
7. You can then reattach the USB cable to both the enclosure
and the computer.
WARNING:
Never install any disks while the device is powered
on or connected to the computer’s USB port.
7
