Sabiana CB-Touch, Operating Instructions Manual

Page: 14 / 40

14
English
Display
Description
t1 t1
Air temperature probe T1 faulty or not connected
Frost alarm
The temperature detected by the temperature probe drops below 5°C.
After 3 minutes in this situation the cooling symbol flashes.
t3 t3
oo
Minimum probe signalling T3
If installed, if the T3 probe is not satisfied, after 3 minutes "
t3 t3
" flashes alternating
with the display of the setpoint.
In addition, depending on the mode you are in, the relevant symbol flashes.
Er Er
Wi-Fi connection loss (connection problems)
In case of Wi-Fi connection loss, the control will send the message “
Er
” on the di-
splay.
Check the connection and the Wi-Fi router status.
Once the Wi-Fi connection is restored, the control will be connected automatically
to the network and delete the error message.
Wi-Fi connection loss (network change)
In case of Wi-Fi connection loss, the control will send the message “
Er
” on the
display.
In case of network change and of Wi-Fi parameters reset, push the
M
button and
then the buttons and for 5 seconds.
At this time the message ‘yes’ appears; push the button
+
to confirm whereas the
button
–
cancels the procedure.
The reset of the Wi-Fi unit parameters and of the login details will take place.
The message will disappear at the next power-on.
Alarm messages