background image

YEAR

TRADE

  

WARRANTY

WARRANTY INFORMATION

is warranty is provided by Total Tools (Importing) Pty Ltd of Unit 5B, 730 Lorimer Street, 
Port Melbourne VIC 3207.  Phone: 03 9261 1900  (we, us, our).  

Express Warranty

Subject to the exclusions set out below, we warrant that this product will be free from defects in 
materials or workmanship for 2 years from the date of purchase.

e benefits conferred by this warranty are in addition to all rights and remedies which you may be 
entitled to under the Australian Consumer Law, and any other statutory rights you may have under 
other applicable laws. is warranty does not exclude, restrict or modify any such rights or remedies.

Warranty exclusions

is express warranty does not apply where a defect or other issue with the product is caused by 
normal wear and tear, misuse or abuse of the product. 

Consumer guarantees

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You 
are entitled to a replacement or refund for a major failure and for compensation for any other 
reasonably foreseeable loss or damage.  

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable 
quality and the failure does not amount to a major failure.

Warranty claims

To make a claim under this warranty, you must bring the product along with the proof of purchase and 
any other documentary evidence which you think is relevant to the Total Tools’ place of purchase 
where the claim will be handled on our behalf. Any cost incurred by you in bringing the product to the 
place of purchase will be borne by you.  

To make a claim under this warranty, the product and proof of purchase must be returned to the Total 
Tools place of purchase during the warranty period specified above.

If your warranty claim is accepted, we (or the Total Tools store that handles the claim on our behalf) 
will, at our discretion, repair or replace the product, or refund money to you and take back the product.

Summary of Contents for BDS6X9















Reviews: