Saba UGV50G5S-ESi, Instruction Manual

Page: 86 / 112

Basic Operation
•
Select the antenna type (Air and Satellite).
Press the
buttons to select the tuning modes and then press the OK button.
(For more detailed information, please refer to Channel menu
→ Auto Tuning).
Press the
► button to go to the next step. Press the ◄ button to go to previous step.
•
The TV starts Auto Tuning.
NOTE:

If the TV doesn't receive any channels, please check your aerial connection or the
country you selected, and then try an auto search again.

If the TV just receives some of the channels, it means the aerial's reception isn't good
enough and an antenna service is recommended.
Programme Selection
• Using the / on the panel of TV or on the remote control.
Press P/
∧
to increase channel number.
Press P/
∨
to decrease channel number.
• Using 0- 9 digital buttons and· button.
You can select the channel number by pressing 0 to 9.
• Example
To select - channel (e.g. Channel 1): Press 1.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
Volume Adjustment
• Press the +/- on the panel of TV or +
- on the remote control to adjust the volume.
• If you want to switch the sound OFF, press the .
• You can release mute by pressing the or increase the volume.
Changing the Input Source
1. You can select the input source by pressing the SOURCE (
) button on the remote
control.
2. Press the arrow button to cycle through the input source, and press the OK button to
confirm your choice.
▲/▼
∧ ∨
20