C. Fill the Rinse Aid Dispenser
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water
from forming droplets on your dishes, which can leave spots
and streaks� It also improves drying by allowing water to roll off
the dishes� Your dishwasher is designed to use liquid rinse aids�
The rinse aid dispenser is located inside the door next to the
detergent dispenser� To fill the dispenser, open the cap and pour
the rinse aid into the dispenser until the level indicator turns
completely black� The volume of the rinse aid container is about
110ml�
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, and spot and streak free drying�
Attention!
Only use branded rinse aid for dishwasher� Never fill the rinse aid
dispenser with any other substances (e�g� Dishwasher cleaning
agent, liquid detergent)� This would damage the appliance�
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can
estimate the amount from the colour of the optical level indicator
“C” located next to the cap� When the rinse-aid container is full,
the whole indicator will be dark �As the rinse-aid diminishes, the
size of the dark dot decreases� You should never let the rinse aid
level fall 1/4 full�
As the rinse aid diminishes, the size of the black dot on the rinse
aid level indicator changes, as illustrated below�
C (Rinse-Aid indicator)
Full
3/4 full
1/2 full
1/4 full - Should refill to
eliminate spotting
Empty
1� To open the dispenser, turn the cap to the “open” (left) arrow
and lift it out�
2� Pour the rinse aid into the dispenser, being careful not to
overfill�
3� Replace the cap by inserting it aligned with “open” arrow and
turning it to the closed (right) arrow�
NOTE:
Clean up any rinse aid spilled while during filling with an
absorbent cloth to avoid excessive foaming during the next wash�
Don’t forget to replace the cap before you close dishwasher door�
79
78
GB
GB
