recommended and provide separate circuit serving only this
appliance.
Electrical Connection
Insure proper ground exists before use
Ensure the voltage and frequency of the power being corresponds
to those on the rating plate. Only insert the plug into an electrical
socket which is earthed properly. If the electrical socket to which
the appliance must be connected is not appropriate for the plug,
replace the socket, rather than using a adaptors or the like as they
could cause overheating and burns.
GROUNDING INSTRUCTIONS
• This appliance must be earthed. In the event of a malfunction
or breakdown, earthing will reduce the risk of electric shock
by providing a path of least resistance for the electric current.
This appliance is equipped with a cord having an equipment-
earthing conductor and an earthing plug. The plug must
be plugged into an appropriate outlet that is installed
and earthed in accordance with all local standards and
requirements.
WARNING!
• Improper connection of the equipment earthing conductor
can result in the risk of an electric shock.
• Check with a qualified electrician or service representative if
you are in doubt whether the appliance is properly earthed.
• Do not modify the plug provided with the appliance. If
the plug does not fit properly to the outlet, please have a
qualified electrician to install a proper outlet.
Water Connection
Cold Water Connection
Connect the cold water supply hose to a
threaded 3/4(inch) connector and make
sure that it is fastened tightly in place. If the
water pipes are new or have not been used
for an extended period of time, let the water
run to make sure that the water is clear. This
precaution is needed to avoid the risk of the
water inlet to be blocked and damage the
appliance.
WARNING!
Please close the hydrant after using.
Drain hose Connection
Insert the drain hose into a drain pipe with a minimum diameter
of 40mm, or let it run into the sink, making sure to avoid bending
or crimping it. The top of the hose must be less than 1000mm.
105
104
GB
GB
