![Saba LVIF1019A++44M Manual Download Page 44](http://html1.mh-extra.com/html/saba/lvif1019a-44m/lvif1019a-44m_manual_3147444044.webp)
Please securely fix the drain hose in either position A or
position B
Back of dishwasher
Mains Cable
Drain Pipe
Water Inlet
Drain hose
Counter
How to drain excess water from hoses
If the sink is 1000 higher from the floor, the excess water in hoses
cannot be drained directly into the sink� It will be necessary to
drain excess water from hoses into a bowl or suitable container
that is held outside and lower than the sink�
Water outlet
Connect the water drain hose� The drain hose must be correctly
fitted to avoid water leaks� Ensure that the water drain hose is not
kinked or squashed�
Extension hose
If you need a drain hose extension, make sure to use a similar
drain hose�
It must be no longer than 4 meters; otherwise the cleaning effect
of the dishwasher could be reduced�
Syphon connection
The waste connection must be at a height less than 100 cm
(maximum) from the bottom of the dish� The water drain hose
should be fixed�
Position The Appliance
Position the appliance in the desired location� The back should
rest against the wall behind it, and the sides, along the adjacent
cabinets or walls� The dishwasher is equipped with water supply
and drain hoses that can be positioned either to the right or the
left sides to facilitate proper installation�
Levelling the appliance
Once the appliance is positioned for levelling, the height of the
dishwasher may be altered via adjustment of the screwing level
of the feet�
In any case, the appliance should not be inclined more than 2°�
NOTE:
Only apply to the free standing dishwasher�
85
84
GB
GB