35
34
GB
GB
Follow the following stages to reverse the door from its initial position�
1�
A� Remove the screw hole cover�
B� Remove the cover of top hinge�
Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
• If you want to have the door swing reversed, we recommend that you contact a qualified
technician� You should only try to reverse the door yourself if you believe that you are qualified
to do so�
• Ensure the unit is unplugged and empty�
• Adjust the two levelling feet to their highest position�
• To take the door off it is necessary to tilt the unit backwards� You should rest the unit on
something solid so that it will not slip during the door reversing process�
• All parts removed must be saved to do the reinstallation of the door�
• The refrigerator inclination angle should be less than 45°�
• Do not lay the unit fat as this may damage the coolant system�
• You should rest the Appliance on something solid e�g� a chair just below the top panel�
• We recommend that 2 people handle the unit during assembly�
2�
A� Remove the top hinge�
B� Remove the top door with care�
Top hinge
Screw hole cover
Cover of top hinge
Storing frozen food
• All frozen food you purchase should be placed in the freezer as soon as possible to avoid them
from defrosting and spoiling�
• All storage recommendations printed on the packaging of frozen food by the manufacturer
should always be followed�
• When using the freezer for the first time or after defrosting, set the thermostat knob to the
maximum position for at least 2 hours before introducing food to be stored, and then readjust it
to the normal position�
Energy-saving tips
• Install the fridge or freezer in a cool place out of direct sunlight and away from cookers, heaters,
dishwashers or any hot air emitting items�
• Do not set the fridge and freezer temperatures lower than necessary� Set the internal
temperature within the correct range e�g� adjust the thermostat at middle position for 4°C in the
fridge compartment and -18°C in the freezer respectively�
• Let pre-cooked foods cool down before placing them in the fridge or freezer� This will prevent
the internal temperature of the fridge from rising�
• Keep your fridge full, but not over crowded, this helps reduce «cold» air loss� Meanwhile, avoid
overloading the fridge or freezer� Try to leave about 20% free space for air circulation�
• To prevent cold air escaping, limit the frequency of opening door� When retuning from shopping,
sort foods to be kept in your fridge before opening the door� Only open the door to put food in or
take it out�
• Make sure the door seal is clean and in good condition� It should hold a piece of paper tightly in
place when shut�
• Defrost regularly or when ice is more than 5mm thick� Thick ice covering the inner sides
significantly increases energy use�
• The combination of the drawers, baskets and shelves shown in the device description is optimal
for efficient energy savings� Changing the combination proposition could alter the efficiency�
Reverse door
Follow these steps to reverse the door from its initial position:
• This refrigerator can be opened either from the left or right side� The default way of opening
the door is from the right side� If you want to open the door from the left side, please follow the
instructions below�
