the internal temperature within the correct range e.g. adjust the
thermostat at middle position -18°C in the freezer respectively.
Let pre-cooked foods cool down before placing them in the fridge or
freezer. This will prevent the internal temperature of the fridge from
rising.
Keep your freezer full, but not over crowded, Try to leave about 20%
free space for air circulation.
To prevent cold air escaping, limit the frequency of opening door.
When retuning from shopping, sort foods to be kept in your freezer
before opening the door. Only open the door to put food in or take it
out.
Make sure the door seal is clean and in good condition. Defrost
regularly or when ice is more than 5mm thick. Thick ice covering the
inner sides significantly increases energy use.
Reverse door
This freezer can be opened either from the left or right side. The
default way of opening the door is from the right side. If you want to
open the door from the left side, please follow the instructions below.
Tools Required: Phillips style screwdriver / Flat blated screwdriver /
Hexagonal spanner
• If you want to have the door swing reversed, we recommend that
you contact a qualified technician. You should only try to reverse
the door yourself if you believe that you are qualified to do so.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest position.
• To take the door off it is necessary to tilt the unit backwards. You
should rest the unit on something solid so that it will not slip
during the door reversing process.
• All parts removed must be saved to do the reinstallation of the
door.
• The refrigerator inclination angle should be less than 45°.
• Do not lay the unit fat as this may damage the coolant system.
• You should rest the Appliance on something solid e.g. a chair just
below the top panel.
• We recommend that 2 people handle the unit during assembly.
Follow the following stages to reverse the door from its initial
position.
11
10
GB
GB
GB