SAB SABIP1500, User Manual, Page: 13 / 86

12
12
same network, you will need to change the HTTPS port for each camera.
4. If the UPnP of the router has been enable, you do not need to perform following steps. Otherwise, you
need to select one of the following methods to configure port forwarding on your router. For these steps, we will
be using the TP-LINK brand wireless router as an example.
 If there is a UPnP function in your router
：
Choose “Forwarding > UPnP”, make sure that the Current UPnP Status is Enabled.
 If there is no UPnP function in your router ：
You need to manually add port forwarding, refer to the following steps. You need go to the “Forwarding >
Virtual Servers” panel for setup.
Click Add New.