25
11.7 OSD Setting
When you enter the “OSD Setting” menu, you
will see a screen like below:
1
OSD Timeout: When you switch channels in
full screen, there will show up some
information about current channel on the
lower of the screen. And regarding to the
duration of these information show up on the
screen, you can press [Volume Up/Volume
Down] key to set the time. The range of the
duration is “1 second ~ 10seconds”.
2
OSD Position: control display position of the
info bar in full screen mode. You can choose
“bottom” or “top”.
3
OSD Transparency: Besides the setting of
“OSD Menu Style”, you also can set the
transparency of OSD. You can press [Volume
Up/Volume Down] key to select the values.
There are 5 levels of transparency, 10%,
20%, 30%, and 40% and “NO” (means no
transparency function).
4
Brightness/Contrast/ Saturation : You can
adjust the parameter about the Video image
by using the [OK]button or press[Volume
Up/Volume Down] key, the default value is
Level 10.
5
Load Default OSD Setting : If you are not
satisfy with your setting, you can move
highlight to this item and press [OK] key to
reset parameters as default value.
6
Press [Exit] key to draw back from the “OSD
Setting” menu.
12. System
When you enter to “System” menu, you will see
a screen like below:
In “System” menu:
1
Press [Up/Down] key to select menu pages
among Information, Default Setting, Software
Upgrade, Upgrade By USB, Backup to USB
2
Press [OK] key to enter the selected item.
12.1 Information
1
When you enter to “Information” menu, you
will see a screen like above. The screen
displays :MODEL ID,S/W VERSION,H/W
VERSION,LOADER VERSION,LATEST
UPDATE,STB SN,STB ID,VFD Version.
2
Press [Exit] key to draw back to “Tools” menu.