40mm
CF ESC Mount
(H1362-S)
Plastic ESC Support
(H1068-S)
Motor Pulley 21T
(H0175-21-S)
Motor Mount
(H1058-S)
Motor Bushing
(H0176-S)
Use with 6mm
motor shaft
Metric Hex
Nylon Nut M5
(HC218-S)
Washer
5.3x 15x1mm
(HC188-S)
Flat Head Cap
Screw M3x10mm
(HC135-S)
Socket Head Cap
Screw M3x10mm
(HC056-S)
Flat Head Cap
Screw M4x6mm
(HC351-S)
Socket Head Cap
Screw M3x8mm
(HC050-S)
Use set Screw M4x4mm or M4x6mm
in according with motor pulley/shaft
(HC152-S)/(HC153-S)
The set screw must be below the
surface of the teeth.
3
rd
bearing support for the motor, H0143-S
Install the support after mounting the motor
and installing the pulley.
H0143 does not need to be used with an 8mm
motor shaft.
Box 3, Bag for page 21
NOTE:
Motor wires pointing forward.
Socket Head Cap
Screw M3x6mm
(HC044-S)
Max height of the motor shaft:
Page 21
INSTALLATION OF THE MOTOR/ESC
