Button Head Cap
Screw M4x10mm
(HC100-S)
BAG18
TAIL BOOM ASSEMBLY
To fit the tail belt, loosen the tail case by loosening the 4 M3 screws (
Figure 1
).
*Install the belt onto the tail front pulley, checking the direction of rotation.
*Insert and tighten the four M4 screws of the boom plate.
*Rotate the tail drive several times by hand.
*Tension the tail case by hand and slowly tighten the 2 BLACK screws in (
Figure 2
).
NOTE:
To disassemble the tail boom, you have to remove the 4 M4 screws.
DO NOT
loosen the 3 M10 plastic screw.
NOTE:
Be sure that the
servo wire does not get
in contact with the belt.
Tensioner Base
Assembly
CF Tensioner Plate
(H1234-S)
Socket Head Cap
Screw M2.5x8
(HC020-S)
Socket Head Cap
Screw M2.5x12mm
(HC022-S)
Tensioner Block
Assembly
Page 26
TAIL BOOM ASSEMBLY
