Saab 2009 9-7X Page 201 Owner'S Manual Download

Page: 201 / 424

Receiving a Call

When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle. Press

and begin speaking to answer the call.

Call Waiting

Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.

•

Press

to answer an incoming call when another

call is active. The original call is placed on hold.

•

Press

again to return to the original call.

•

To ignore the incoming call, continue with the
original call with no action.

Three-Way Calling

Three-Way Calling must be supported on the Bluetooth
phone and enabled by the wireless service carrier
to work.

1. While on a call press

. The system responds

with “Ready” followed by a tone.

2. Say “Three-way call”. The system responds with

“Three-way call, please say dial or call”.

3. Use the dial or call command to dial the number of

the third party to be called.

4. Once the call is connected, press

to link all the

callers together.

Ending a Call

To end a call:

1. Press

. The system responds with “Ready”

followed by a tone.

2. Say “End Call”. The call is then ended.

Muting a Call

During a call, all sounds from inside the vehicle can be
muted so that the person on the other end of the
call cannot hear them.

To Mute a call

1. Press

. The system responds with “Ready”

followed by a tone.

2. Say “Mute Call”. The system responds with

“Call muted”.

3-81

Summary of Contents for 2009 9-7X









































































































































































































































































































































































































































Search results

Summary of Contents for 2009 9-7X

Reviews:

Related manuals for 2009 9-7X

Brands by name

Popular brands

Saab 2009 9-7X, Owner'S Manual

Search results

Summary of Contents for 2009 9-7X

Reviews:

Related manuals for 2009 9-7X

Brands by name

Popular brands