To use the accessory inflator, do the following:
1. Attach the appropriate nozzle adapter to the end of
the hose if required.
2. Attach that end of the hose to the object you wish
to inflate.
3. Attach the other end of the hose to the outlet.
4. Press and release the switch to turn the air inflator
on. The indicator light will remain on when the
inflator is running.
The system has an internal clock to prevent
overheating. The system will allow about
five minutes of running time, then the compressor
will stop. The indicator light will then begin to
flash. When the indicator is off, the inflator can be
started again by pressing the switch. If the
compressor is still hot, it may only run for a short
time before shutting off again.
5. Press and release the switch to turn the inflator off.
Place the inflator kit tools in the pouch and store it in its
proper location. Remove the inflator hose from the
outlet during loading and unloading. Load leveling will
not function with the inflator hose attached to the inflator
outlet. See Electronically Controlled Air Suspension
System on page 4-34 for more information.
To reinstall the cover, line up the tabs at the back of the
cover, put it in place and latch the tabs.
A continuous flashing indicator light may also
indicate a malfunction in the air suspension system.
See Electronically Controlled Air Suspension System
on page 4-34 for more information.
{
CAUTION:
Inflating something too much can make it
explode, and you or others could be injured.
Be sure to read the inflator instructions, and
inflate any object only to its recommended
pressure.
5-69
2005 - Saab 97X Owner Manual
