4 12 832 516
Saab 9-3 CV M04-
1 Connect the diagnostic tool and disconnect the
infotainment system control panel from the car.
Go into the menu “All” and choose the control
module under “Add/Remove”. Then choose
“Remove” and follow the instructions. The igni-
tion key must be in the ON position. TIS 2000
may need to be used. When the control module
is separated from the car the ignition key must
be turned to the OFF position. Following which
the control module can be removed.
Important
In cars where the left-hand front seat is electrically
adjustable and there is no bracket at the rear fuse
box, the left-hand front seat must be positioned in
its most forward position and with the backrest
folded forwards.
Important
The control module is sensitive to electrostatic
discharges. To avoid damaging the internal compo-
nents in the control module, a replacement must be
made with care in the following way:
•
Never touch the pins on a control module with
hands or clothes.
•
Ground yourself by touching the car's body/
engine. Remove the connector on the car's
control module.
•
Ground yourself by touching the car's body/
engine. Connect the connector on the car's
control module.
•
Deposit the replaced control module in the
returns packaging without touching its pin.
•
Keep the new control module in its packaging
as long as possible.
